usability improvements

modules/nixos/bluetooth.nix

@@ -26,17 +26,6 @@
 
   hardware.bluetooth = {
     enable = true;
-    # powerOnBoot = true;
-    # settings = {
-    #   General = {
-    #     Name = "Nixtre";
-    #     ControllerMode = "dual";
-    #     FastConnectable = "true";
-    #     Experimental = "true";
-    #   };
-    #   Policy = {
-    #     AutoEnable = "true";
-    #   };
-    # };
+    powerOnBoot = false;
   };
 }

modules/nixos/power.nix

@@ -20,9 +20,9 @@
     services.tlp = {
       enable = true;
       settings = {
-        # processor chooses frequencies itself
-        CPU_DRIVER_OPMODE_ON_AC = "active";
-        CPU_DRIVER_OPMODE_ON_BAT = "active";
+        # processor chooses frequencies itself but respects the limits set by the user
+        CPU_DRIVER_OPMODE_ON_AC = "guided";
+        CPU_DRIVER_OPMODE_ON_BAT = "guided";
 
         # governor dictates global behavior of the CPU
         CPU_SCALING_GOVERNOR_ON_BAT = "powersave";
@@ -32,78 +32,29 @@
         CPU_ENERGY_PERF_POLICY_ON_BAT = "balance_power";
         CPU_ENERGY_PERF_POLICY_ON_AC = "performance";
 
-        # CPU_MIN_PERF_ON_AC = 0;
-        # CPU_MAX_PERF_ON_AC = 100;
-        # CPU_MIN_PERF_ON_BAT = 0;
-        # CPU_MAX_PERF_ON_BAT = 50;
+
+        # clock speeds reported by `sudo tlp-stat`
+        # 623377 [kHz] and 5090910 [kHz]
+        # CPU_SCALING_MIN_FREQ_ON_AC = 623377;
+        # CPU_SCALING_MAX_FREQ_ON_AC = 5090910;
+        # CPU_SCALING_MIN_FREQ_ON_BAT = 0;
+        # # reduce max frequency on battery to save power
+        # CPU_SCALING_MAX_FREQ_ON_BAT = 3000000;
+
+        # Allow the CPU to boost
+        CPU_BOOST_ON_AC = 1;
+        CPU_BOOST_ON_BAT = 1;
+
+
+        RADEON_DPM_PERF_LEVEL_ON_AC = "high";
+        WIFI_PWR_ON_BAT = "off";
 
         # enable battery charge thresholds on the default battery
         STOP_CHARGE_THRESH_BAT0 = 1;
-
-
-        # STOP_CHARGE_THRESH_BAT0 = 80;
-
-        # CPU_BOOST_ON_AC = 1;
-        # CPU_BOOST_ON_BAT = 0;
-        # CPU_HWP_DYN_BOOST_ON_AC = 1;
-        # CPU_HWP_DYN_BOOST_ON_BAT = 0;
       };
     };
 
 
-  # services.watt = {
-  #   enable = true;
-  #   settings = {
-  #     charger = {
-  #       governor = "performance";
-  #       turbo = "auto";
-  #       epp = "performance";
-  #       epb = "balance_performance";
-  #       platform_profile = "performance";
-
-  #       enable_auto_turbo = true;
-  #       # Custom thresholds for auto turbo management
-  #       turbo_auto_settings = {
-  #         load_threshold_high = 70.0;
-  #         load_threshold_low = 30.0;
-  #         temp_threshold_high = 75.0;
-  #         initial_turbo_state = false;  # whether turbo should be initially enabled (false = disabled)
-  #       };
-  #     };
-
-  #     battery = {
-  #       governor = "powersave";
-  #       turbo = "auto";
-  #       epp = "power";
-  #       epb = "balance_power";
-  #       platform_profile = "low-power";
-
-  #       enable_auto_turbo = true;
-  #       # Custom thresholds for auto turbo management
-  #       turbo_auto_settings = {
-  #         load_threshold_high = 80.0;
-  #         load_threshold_low = 40.0;
-  #         temp_threshold_high = 65.0;
-  #         initial_turbo_state = false;  # whether turbo should be initially enabled (false = disabled)
-  #       };
-
-  #     };
-
-  #     daemon = {
-  #       poll_interval_sec = 10;
-  #       adaptive_interval = true;
-  #       min_poll_interval_sec = 1;
-  #       max_poll_interval_sec = 30;
-  #       throttle_on_battery = true;
-  #       stats_file_path = "/var/run/watt-stats";
-  #     };
-  #     # battery_charge_thresholds = [50 90];
-  #   };
-
-
-  #   # logind.lidSwitchExternalPower = "ignore"; # prevent lid switch from triggering a suspend
-  # };
-
     systemd.sleep.extraConfig = ''
       AllowSuspend=yes
       AllowHibernation=yes

modules/nixos/stylix.nix

@@ -5,7 +5,29 @@
   ...
 }:
 {
-  stylix.enable = true;
-  stylix.image = ./../../wallpapers/magicpattern-87PP9Zd7MNo-unsplash.jpg;
-
+  stylix = {
+    enable = true;
+    polarity = "dark";
+    homeManagerIntegration.followSystem = false;
+    base16Scheme = {
+      # scheme = "onedark";
+      # author = "https://github.com/one-dark";
+      base00 = "#282c34";
+      base01 = "#353b45";
+      base02 = "#3e4451";
+      base03 = "#545862";
+      base04 = "#565c64";
+      base05 = "#abb2bf";
+      base06 = "#b6bdca";
+      base07 = "#c8ccd4";
+      base08 = "#e06c75";
+      base09 = "#d19a66";
+      base0A = "#e6c07b";
+      base0B = "#98c379";
+      base0C = "#56b6c2";
+      base0D = "#61afef";
+      base0E = "#c678dd";
+      base0F = "#be5046";
+    };
+  };
 }

modules/nixos/usb_config.nix

@@ -1,17 +0,0 @@
-{
-    config,
-    pkgs,
-    ...
-}:
-{
-    boot.loader.grub.enable = true;
-
-    boot.loader.grub.efiSupport = true;
-    # location at install time. Since the drive is a USB drive this is expcected to change on each device
-    boot.loader.grub.device = "/dev/sdb";
-    boot.loader.grub.efiInstallAsRemovable = true;
-    boot.loader.systemd-boot.enable = false;
-
-    boot.loader.efi.canTouchEfiVariables = false;
-    boot.tmp.useTmpfs = true;
-}

modules/nixos/user.nix

@@ -20,6 +20,7 @@ in
       isNormalUser = true;
       extraGroups = [
         "wheel" # Enable ‘sudo’ for the user.
+        "input"
         # other groups are added as needed, eg. networkmanager
       ];
     };